Untitled Document
 
PRODUCTS
 
  Menu
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
 
 
 

Home » XPS Products » XtremeLink® » Telemetry

 Checkout
EVO Upgrade Kit
1 of 3

Details 

Have an older EVO XtremeLink module and want to upgrade to Multiplex's latest firmware version? If so, you have to upgrade your EVO board and it's firmware.

v3.0 and later of the EVO's transmitter firmware supports Multiplex's "M-Link", which is their 2.4GHz system. Using a new harness assembly and a firmware upgrade, we emulate the M-Link system. This gives you all of the M-Link features, such as ability to do the range test from the front buttons, binding receivers from the front buttons, and even telemetry support. This upgrade package also includes the new top mount antenna adapter and antenna coax. You install the antenna through the top of the transmitter and snap on the antenna connector on our board. This upgrade supports all Multiplex firmware versions up to 3.46, and still supports the older versions if you go backwards in versions.

How to upgrade

Purchase this upgrade, and then send in a copy of your purchase invoice with your original EVO XtremeLink board. We will modify the board and install the new harness, reflash the board, test it all, and send it back with the new antenna system.

Xtreme Power Sytems
Attn: EVO Upgrade
3269 Maricopa Ave. Ste. 114-511
Lake Havasu City, AZ 86406
USA

List Price: $39.95
Price: $24.95

XtremeLink® Device Programmer

Details 

This device and software allows you to wirelessly change the settings of XtremeLink® receivers and transmitter module! It also allows you to update the firmware of receivers and transmitter modules for those units that are in-field upgradable*.

Software is available for download from our website in the DOWNLOADS section.

Requires a USB type A to mini-b cable (commonly used with cell phones and digital cameras).

Applications for RxDiag, TxDiag, Device Programmer, and spectrum analyzer are currently available. Future applications such as support for flight simulators will be released in the future.

Detailed information can be found on our XDP support page. Click Here

* Only in-field upgradable units can have their firmware updated with this device. All units not capable of in-field updates can not be made to allow in-field updates. In these cases, new hardware is required.

List Price: $49.95
Price: $39.95

XtremeLink® Telemetry Station

Details 

This PC based hardware device and software allows you to wirelessly obtain telemetry data from any XPS receiver and transmitter in real time. The data can also be recorded and played back for later viewing. Information available: receiver battery voltage, transmitter battery voltage, signal strength, frame rate, number of channels in use, servo positions, brown out conditions, and information from any sensor connected (sensors sold separately).

This unit also performs all of the same functions as the Xtreme Device Programmer (XDP).

NOTE: v3.0 of later of the XtremeLink® firmware (both transmitter module and receivers) is required in order to use this product. This upgrade requires the return of your existing hardware to accomplish this. It is not possible to for a user upgrade any existing pre-v3.0 units in-field due to a necessary RF firmware change. Details on how to return your system(s) will be included when you receive this product.

Requires a USB type A to mini-b cable (commonly used with cell phones and digital cameras).

Detailed information can be found on our Telemetry Station support page. Click Here

List Price: $149.00
Price: $59.00

XtremeLink Hardware Repair

Details 

XtremeLink radio systems are covered by a limited lifetime warranty. We will repair or replace your damaged item(s) at no cost to you. However you are required to pay shipping costs to and from Xtreme Power Systems for this service.

NO RMA IS REQUIRED.

Just add this REPAIR to your cart. You can continue your shopping or go immediately to check out. You will be paying for return shipping cost only. Once you have completed the order, print a copy of the order receipt.

Please ship your damaged/defective product(s) with the printed copy of your order showing the XtremeLink Hardware Repair to:

Xtreme Power Systems
Attn: Hardware Repair
3269 Maricopa Ave. Ste. 114-511
Lake Havasu City, AZ 86406
USA


Please note: if you add other items to the shopping cart, we will hold the order and wait until we have received the item(s) to be repaired, and return the repaired item(s) back to you along with the other items you ordered.

Price: $0.00

XtremeLink Firmware Upgrade

Details 

Upgrade your existing XtremeLink system to the latest version for one flat fee. Upgrade as many pieces that you own. NO GROUPED ORDERS ALLOWED!

Latest firmware version is: v3.9 (Rx), v3.8 (Tx)

V3.x Firmware upgrade. Includes multiple receiver support, full time frequency hopping, and more!

After you purchase this upgrade, you will need to send in all pieces of your XtremeLink system. You must return your transmitter module, receivers, XDP, and telemetry station if you want the full 3.x upgrade.

YOU MUST INCLUDE A COPY OF YOUR RECEIPT FOR THIS ORDER WITH YOUR ITEMS TO BE UPGRADED!

DO NOT SEND TRANSMITTERS WITH YOUR SYSTEM! THEY WILL BE RETURNED WITHOUT BEING UPGRADED.

NO RMA IS REQUIRED.

Please ship a copy of your order, along with your XtremeLink products to be upgraded to:

Xtreme Power Sytems
Attn: Firmware Upgrade
3269 Maricopa Ave. Ste. 114-511
Lake Havasu City, AZ 86406
USA

List Price: $39.95
Price: $39.95

Untitled Document
Untitled Document
Copyright © 2006-16
Xtreme Power Systems
Legal Information
home | products | search | checkout | contact