Home » XPS Products » Miscellaneous
Requires e-Flite electric retract units.
Comes with laser cut left wing, right wing, and nose gear mounting plates, and plastic template.
Assembly instructions are located here:
Retract Installation Guide
Here are some video made by our customers!
Genuine 3M brand Blenderm.
The TattleTale is a tiny and lightweight device that plugs into a empty receiver channel (or through a Y-cable). This device measures the input voltage and displays the lowest voltage threshold that was captured after being powered on. With a programmable acquisition time of 1ms to 100ms, even the shortest voltage sags can be detected!
The TattleTale also monitors your servo signal and immediately reports any "glitch" in the servo output by flashing the multi-colored LED. PPM glitches, failsafes, and even reboots can now be reported!
As a special bonus, the TattleTale can also be a programmable timer, flashing the LED bright white after time has expired. This is great for night flyers!
People have been flying for decades with inadequate power. With the development of 2.4GHz radio systems, power requirements are now being enforced. Don't be caught with a power system that is marginal and risk your aircraft, car, or boat!
Voltage detection range from 2.1v to 16v
Voltage acquistion every 1ms to 100ms
Receiver glitch/failsafe/reboot detection
Programmable flight timer
Small size: .5" x .75"
Light weight: 1.75g (.062 oz)
Harness with EC3 connectors using 7.5" long 14awg wires. These are sold as pairs (male and female). Ideal for use with the XPS-X10+ expander!
Wire: 14awg, tinned
Male XT60 connector with with 7.5" long 14awg wires. These are sold as single units (no male side). Ideal for use with the XPS-X10+ expander and a 2S Lipo pack!
Wire: 24awg, flat
Offering the absolute best EMI/RFI noise rejection and incredible flexibility, this cables is the #1 choice for all types of servo and battery wiring.
These heavy duty cables features 22awg wire, ideal for running long lengths with low current loss. Forget extensions! Make your own cables the exact length you need!
Wire: 22awg, ultra-twist
Sold by the foot
Great for wiring wings, elevators, and other surfaces that need easy removal. These are sold as pairs (male and female).
Commonly used for batteries. Easy to grab molded grip makes separation a breeze! These connectors are sold as pairs (male and female).
Commonly used for batteries. Easy to grab molded grip makes separation a breeze! These connectors are sold as pairs only.
This device and software allows you to change the settings of X10+ Channel Expander and future products from XPS.
Requires a USB type A to mini-b cable (commonly used with cell phones and digital cameras), and JR female to female cable, both not supplied.
Works only with the 'XDP.exe' program in the XDP softrware package.
Detailed information and installation software can be found on our XDP support page. Click Here
Fill that empty antenna hole with our Radio Tool! This tool has an attractive name plate (XPS on one side, and XtremeLink┬« on the other) and a long stem that you can use to bind your receivers!
Dual removable o-rings hold the tool in place. Fits most transmitters.
NO RMA IS REQUIRED.
Just add this REPAIR to your cart. You can continue your shopping or go immediately to check out. You will be paying for return shipping cost only. Once you have completed the order, print a copy of the order receipt.
Please ship your damaged/defective product(s) with the printed copy of your order showing the XtremeLink┬« Hardware Repair to:
Xtreme Power Systems
Attn: Hardware Repair
3269 Maricopa Ave. Ste. 114-511
Lake Havasu City, AZ 86406
Please note: if you add other items to the shopping cart, we will hold the order and wait until we have received the item(s) to be repaired, and return the repaired item(s) back to you along with the other items you ordered.
Please ship a copy of your upgrade order, along with your XtremeLink┬« JR module to be upgraded to:
Xtreme Power Sytems
Attn: Firmware Upgrade
1642 McCulloch Blvd. N. #394
Lake Havasu City, AZ 86403
Latest firmware version is: v3.9 (Rx), v3.8 (Tx)
V3.x Firmware upgrade. Includes multiple receiver support, full time frequency hopping, and more!
After you purchase this upgrade, you will need to send in all pieces of your XtremeLink┬« system. You must return your transmitter module w/antenna, receivers, XDP, and telemetry station if you want the full 3.x upgrade.
YOU MUST INCLUDE A COPY OF YOUR RECEIPT FOR THIS ORDER WITH YOUR ITEMS TO BE UPGRADED!
DO NOT SEND TRANSMITTERS WITH YOUR SYSTEM! THEY WILL BE RETURNED WITHOUT BEING UPGRADED.
Please ship a copy of your order, along with your XtremeLink┬« products to be upgraded to: