Protect your ESC and your connector with this anti-spark system!

Temporarily connects between the positive side of the ESC and the positive battery lead. This devices charges the capacitotrs in the ESC slowly (about 2 seconds with a Castle HV110 controller) to prevent that nasty spark that can cause permanent damage to your controller and connectors!!

Can be soldered into the positive ESC lead for a permanent solution, or used with connectors for a portable soluton. Comes with 3" 14awg leads on each side, overall length is 7.25".

Add retracts to your Parkzone Habu with this laser cut kit!

Requires e-Flite electric retract units.

Comes with laser cut left wing, right wing, and nose gear mounting plates, and plastic template.

Assembly instructions are located here: Retract Installation Guide

Here are some video made by our customers!

http://www.youtube.com/watch?v=g2qblDtUi-A

http://www.youtube.com/watch?v=vtp9LA_5RiE

The ultimate AC power supply!

This heavy-duty UL approved power supply packs a serious punch! Dual outputs can power multiple chargers simultanouesly!

Features:

Dual 13.8v power supply outputs (30A total)
Dual 1A USB charge jacks for iPod, iPhone, MP3 playter, camera, etc.
Large red LED indicates current output
Cooling fan
Over temperature protection
Over current protection
Short circuit protection

The iMax B8+ battery charger uses the latest technology to properly charge Lipos, NiMH, NiCd, Pb, and LiFe batteries.

With its 150W output capability, the iMax B8+ can charge up to 8 Lipo cells and output up to 7 amps!

The iMax B8+ is easy to setup, easy to use, and has a built-in balancer. Numerous safety circuits, incuding optional temperature monitoring, prevents the possibility of overcharging your cells.

An optional USB interface with PC software allows you to charge, discharge, cycle, and monitor your packs and store the results for later review!

Fast charge and storage charge modes are part of the numerous prgramming options available!

Features include:

Backlight LCD display
Bulit-in JST balancer port w/Thunder Power adapater
Charges 1-8 Lipo/LiFe cells, 1-27 NiMH/NiCd cells, 2v-36v Pb
Charge current of .1A to 7.0A
Discharge current of .1A to 5.0A
Input voltage: 6V-18V DC
Built-in cooling fan
Stylish black heat sink case

Comes with input cable with banana jacks and large clamp-on connecters, output cable with JST, Tamiya, and bare wires.

USB interface and software for the iMax B8+ battery charger. Software provides the ability to charge, discharge, and cycle packs. All data is shown and can be saved for later review.

Comes with USB interface, USB cable, mini-CD, and Windows compatible software.