Untitled Document
 
PRODUCTS
 
  Menu
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
 
 
 

Home » XPS Products » All Products

 Checkout
2.4GHz Aurora 9 transmitter module
1 of 4

Details 

XtremeLink® 2.4GHz transmitter module specifically for the Hitec Aurora 9 transmitter..

Provides receiver battery voltage and signal strength through the Aurora 9's telemetry display (Telemetry support requires 8 or 10 channel XtremeLink® receiver with v3.7 or later firmware).

Support for interfacing Eagletree and Hitec sensors is coming soon! ALL Aurora 9 modules are in-field flashable!

List Price: $159.00
Price: $99.95

XPS ESC Anti-spark System
1 of 2

Details 

Protect your ESC and your connector with this anti-spark system!

Temporarily connects between the positive side of the ESC and the positive battery lead. This devices charges the capacitotrs in the ESC slowly (about 2 seconds with a Castle HV110 controller) to prevent that nasty spark that can cause permanent damage to your controller and connectors!!

Can be soldered into the positive ESC lead for a permanent solution, or used with connectors for a portable soluton. Comes with 3" 14awg leads on each side, overall length is 7.25".

List Price: $12.95
Price: $4.95

2.4GHz Multiplex EVO transmitter module

Details 

XtremeLink® 2.4GHz transmitter Multiplex EVO series radios (7, 9, and 12 channel versions).

Consisting of one XtremeLink® 2.4GHz transmitter module (internal), adapter plug, and antenna.

SUPPORTS ALL VERSIONS OF EVO FIRMWARE UP TO v3.50!

List Price: $169.00
Price: $129.00

EVO Upgrade Kit
1 of 3

Details 

Have an older EVO XtremeLink module and want to upgrade to Multiplex's latest firmware version? If so, you have to upgrade your EVO board and it's firmware.

v3.0 and later of the EVO's transmitter firmware supports Multiplex's "M-Link", which is their 2.4GHz system. Using a new harness assembly and a firmware upgrade, we emulate the M-Link system. This gives you all of the M-Link features, such as ability to do the range test from the front buttons, binding receivers from the front buttons, and even telemetry support. This upgrade package also includes the new top mount antenna adapter and antenna coax. You install the antenna through the top of the transmitter and snap on the antenna connector on our board. This upgrade supports all Multiplex firmware versions up to 3.46, and still supports the older versions if you go backwards in versions.

How to upgrade

Purchase this upgrade, and then send in a copy of your purchase invoice with your original EVO XtremeLink board. We will modify the board and install the new harness, reflash the board, test it all, and send it back with the new antenna system.

Xtreme Power Sytems
Attn: EVO Upgrade
2440 Kiowa Blvd. N. #102
Lake Havasu City, AZ 86403
USA

List Price: $39.95
Price: $24.95

2.4GHz Futaba 9C transmitter module

Details 

XtremeLink® 2.4GHz transmitter module for Futaba 9C and other transmitters.

Not compatible with Futaba 9Z, Futaba surface radios, or Hitec transmitters.

List Price: $159.00
Price: $99.95

2.4GHz JR 11x transmitter module

Details 

Internal XtremeLink® 2.4GHz JR11x transmitter module.


Convert your DSM2/DSMX JR11x transmitter to an XtremeLink® 2.4GHz system!

Easy to install. See the manual for installation details!

List Price: $139.00
Price: $79.95

2.4GHz Graupner MX-24 / JR 12x transmitter module

Details 

XtremeLink® 2.4GHz Graupner MX-24 / JR11x transmitter module.


Easy to install. See the manual for installation details!

List Price: $139.00
Price: $99.95

Laser cut retract kit for Parkzone Habu

Details 

Add retracts to your Parkzone Habu with this laser cut kit!

Requires e-Flite electric retract units.

Comes with laser cut left wing, right wing, and nose gear mounting plates, and plastic template.

Assembly instructions are located here: Retract Installation Guide

Here are some video made by our customers!

http://www.youtube.com/watch?v=g2qblDtUi-A

http://www.youtube.com/watch?v=vtp9LA_5RiE

List Price: $19.95
Price: $11.95

2.4GHz Multiplex Profi transmitter module

Details 

XtremeLink® 2.4GHz transmitter module for Multiplex Profi series radios (4000 and 3030 versions).

Consisting of one XtremeLink® 2.4GHz transmitter module (internal), adapter plug, and antenna w/ball.

List Price: $169.00
Price: $139.00

Blenderm hinge tape

Details 

The best hinge tape for use with foamies! Semi-permanent, stretches easily, resistant to heat, won't dry out and crack like other tapes.

Genuine 3M brand Blenderm.

List Price: $4.95
Price: $3.00

X24 Channel Expander-Deluxe

Details 

X24 Channel Expander (Deluxe Edition w/current sensing)

Compatible with XtremeLink®, Futaba SBUS/SBUS2, Spektrum satellite, JR DMSS X-Bus (Mode A & Mode B), Graupner HoTT SUMD, JETI UDI, and Multiplex SLRx receivers!


Click picture for more details!


The X24 Channel Expander is the big brother to our popular X10+ Chanel Expander. This device acts as a power expander, channel expander, voltage monitor, and failsafe system for different types of receivers that output a serial data stream. So, XPS Nano, Nano II, & RFU, Futaba SBUS/SBUS2, Spektrum satellite, JR DMSS X-Bus (Mode A & Mode B), Graupner HoTT SUMD, JETI UDI, and Multiplex SLRx receivers are all supported! ALL types of servos are supported! You don't need special and expensive servos!

Up to four receivers can be used with all supported systems!

X24 Specifications:

Input type: four inputs using a serial data stream
Channel outputs: 24
Operating voltage: 2.1v - 16v
Servo bus current: Dual 100A inputs
Recognized protocols: Xtreme, Futaba SBUS/SBUS2, Spektrum satellite, JR DMSS X-Bus (Mode A & Mode B),Graupner HoTT SUMD, JETI UDI, and Multiplex SLRx
Size: 3.6" x 3.8" x .650"
Weight: 3.85oz (109.25g) w/dual sets of 16awg power wires
Recommeneded accessories: XPS Serial Link, UltraTwist cables, LEDs, pin & flag switch

Click here for accessories.

Click here to see the X24 manual.

Note: these units are made to order! Select your option below.


Special introductory offer! Get the X24 (Deluxe Edition) for $50 off for a limited time!


 Select the type of wire connection for the X24. All X24 boards are assembled as they ordered, so please allow 1 day for assembly.
List Price: $369.00
Price: $199.95

X24 Channel Expander-Standard

Details 

X24 Channel Expander (Standard Edition without current sensing)

Compatible with XtremeLink®, Futaba SBUS/SBUS2, Spektrum satellite, JR DMSS X-Bus (Mode A & Mode B), Graupner HoTT SUMD, JETI UDI, and Multiplex SLRx receivers!


Click picture for more details!


The X24 Channel Expander is the big brother to our popular X10+ Chanel Expander. This device acts as a power expander, channel expander, voltage monitor, and failsafe system for different types of receivers that output a serial data stream. So, XPS Nano, Nano II, & RFU, Futaba SBUS/SBUS2, Spektrum satellite, JR DMSS X-Bus (Mode A & Mode B), Graupner HoTT SUMD, JETI UDI, and Multiplex SLRx receivers are all supported! ALL types of servos are supported! You don't need special and expensive servos!

Up to four receivers can be used with all supported systems!

X24 Specifications:

Input type: four inputs using a serial data stream
Channel outputs: 24
Operating voltage: 2.1v - 16v
Servo bus current: Dual 100A inputs
Recognized protocols: Xtreme, Futaba SBUS/SBUS2, Spektrum satellite, JR DMSS X-Bus (Mode A & Mode B),Graupner HoTT SUMD, JETI UDI, and Multiplex SLRx
Size: 3.6" x 3.8" x .650"
Weight: 3.85oz (109.25g) w/dual sets of 16awg power wires
Recommeneded accessories: XPS Serial Link, UltraTwist cables, LEDs, pin & flag switch

Click here for options.

Click here to see the X24 manual.

 Select the type of wire connection for the X24. All X24 boards are assembled as they ordered, so please allow 1 day for assembly.
List Price: $329.00
Price: $199.95

2.4GHz Futaba 9Z/Hitec transmitter module

Details 

XtremeLink® 2.4GHz transmitter module for Futaba 9Z, Futaba surface radios, and Hitec radios.
List Price: $159.00
Price: $99.95

2.4GHz 6 channel Nano-E end pin receiver

Details 

XtremeLink® 2.4GHz 6 channel Nano III end pin receiver


The 4th generation of XtremeLink® 2.4GHz receivers is here!

This end pin receiver is ideal for use in small gliders and anything requiring a tiny and lightweight receiver! However, don't let the size of this receiver fool you - it's a full range receiver! In fact, it has better range than the original 8 and 10 channel receivers we offered.

Supports PWM, PPM, "Xtreme" and "mixed mode" outputs so you can use flight stablizers, helicopter gyro systems, etc. with a single servo wire connection! With an operational voltage of just 1.8 volts (and up to 16v), brown outs are never a concern!

Supports wireless programming through our XDP unit

Compatible with all XtremeLink® and iFS brand radio systems.

Specifications:

Size: 1.4" x .71" (36.1mm x 18.25mm)
Weight: .124oz (3.5g)
Voltage: 1.8v - 16v

List Price: $39.95
Price: $29.95

18A speed controller (auto)

Details 

18 amp brushless motor speed controller. This unit has every setting except BRAKE automatically set based on the motor type and battery type. No fuss, easy install.

Built-in 2A BEC.

These are compatible with the open source code for quad copters!

List Price: $29.95
Price: $9.95

25A speed controller (auto)

Details 

25 amp brushless motor speed controller. This unit has every setting except BRAKE automatically set based on the motor type and battery type. No fuss, easy install.

Built-in 2A BEC.

These are compatible with the open source code for quad copters!

List Price: $34.95
Price: $14.95

XPS 6S 5200 50C Lipo pack
1 of 3

Details 

XPS 6S 5200-50C/75C Lipo pack. This is a QUALITY 6S Lipo pack, created for the high current demands of modern electric fan systems, 3D aircraft, and helicopters!

These new packs boast a 50C continuous rating with a 75C burst rating, and come with 8 awg wires and 6mm bullet connectors to pump the power through! New technology makes these 5200mAh packs smaller and lighter than most 4500mAh-5000mAh packs out there!

The 1 year no-puff warranty* guarantees that you won't be stuck with a dud pack! New chemistry allows these packs to be left fully charged without puffing! However, we do recommend you keep unused packs at a storage charge voltage of 3.75v per cell to insure the full lifespan of the pack.

We offer price breaks at 2, 4, and 10 pieces! Stock up and save!

Specification:

Type: Lipoly (4.2v per cell)
Cells: 6
Capacity: 5200mAh
C Rating: 50C/75C
Size: 6.15"(156mm) x 1.93"(49mm) x 1.79"(45.5mm)
Weight: 27oz(768g)
Power wire connectors: 6mm bullet
Balance connector: JST XH

Note - these packs are unlabeled.

* The no-puff warranty covers any batteries that become puffy and unusable due to normal use. Batteries damaged in anyway, including but not limited to, crash damage, over-charge, over-discharge, alterations, or physical abuse, are not covered by this warranty.

List Price: $159.95
Price: $70.00

2.4GHz JR transmitter module

Details 

XtremeLink® 2.4GHz transmitter module for JR radios.
List Price: $159.00
Price: $99.95

2.4GHz 6 channel Nano-T top pin receiver

Details 

XtremeLink® 2.4GHz 6 channel Nano III top pin receiver


The 4th generation of XtremeLink® 2.4GHz receivers is here!

This top pin receiver is ideal for use in small gliders and anything requiring a tiny and lightweight receiver! However, don't let the size of this receiver fool you - it's a full range receiver! In fact, it has better range than the original 8 and 10 channel receivers we offered.

Supports PWM, PPM, "Xtreme" and "mixed mode" outputs so you can use flight stabilizers, helicopter gyro systems, etc. with a single servo wire connection! With an operational voltage of just 1.8 volts (and up to 16v), brown outs are never a concern!

Supports wireless programming through our XDP unit

Compatible with all XtremeLink® and iFS brand radio systems.

Specifications:

Size: 1.05" x .71" (27.5mm x 18.25mm)
Weight: .11oz (3.1g)
Voltage: 1.8v - 16v

List Price: $39.95
Price: $29.95

18A speed controller (programmable)

Details 

18 amp brushless motor speed controller. Fully programmable controller using either throttle stick input or our programming card.

Built-in 2A BEC.

These are compatible with the open source code for quad copters!

List Price: $34.95
Price: $14.95

25A speed controller (programmable)

Details 

25 amp brushless motor speed controller. Fully programmable controller using either throttle stick input or our programming card.

Built-in 2A BEC.

These are compatible with the open source code for quad copters!

List Price: $39.95
Price: $19.95

2.4GHz Universal transmitter module

Details 

XtremeLink® 2.4GHz universal transmitter module.

List Price: $169.00
Price: $109.00

2.4GHz M8/M11 transmitter module

Details 

XtremeLink® 2.4GHz transmitter module for Airtronics M8 or M11 surface radios.

Integrated antenna system.

List Price: $159.00
Price: $99.95

2.4GHz 6 channel Nano pin-less receiver

Details 

XtremeLink® 2.4GHz 6 channel Nano III pin-less receiver


The 4th generation of XtremeLink® 2.4GHz receivers is here!

This pin-less receiver is ideal for use in small indoor aircraft where the extra weight of servo pins might be a burden! This is the same receiver as our end pin and top pin versions, so don't let the size of this receiver fool you - it's a full range receiver!

Supports PWM, PPM, "Xtreme" and "mixed mode" outputs so you can use flight stabilizers, helicopter gyro systems, etc. with a single servo wire connection! With an operational voltage of just 1.8 volts (and up to 16v), brown outs are never a concern!

Supports wireless programming through our XDP unit

Compatible with all XtremeLink® and iFS brand radio systems.

Specifications:

Size: 1.05" x .71" (27.5mm x 18.25mm)
Weight: .039oz (1.1g)
Voltage: 1.8v - 16v

List Price: $39.95
Price: $29.95

X10+ Channel Expander

Details 

XtremeLink® X10+ Channel Expander

Compatible with XtremeLink®, JR DMSS X-Bus (Mode A & Mode B), Futaba SBUS/SBUS2, Graupner HoTT SUMD, JETI UDI, and Spektrum/compatible Satellite receivers!


Click picture for more details!


The X10+ Channel Expander is a small device that acts as a power expander, channel expander, voltage monitor, and failsafe system for different types of receivers that output a serial data stream. So, XPS Nano, Nano II, & RFU, JR DMSS X-Bus (Mode A & Mode B), Futaba SBUS/SBUS2, Graupner HoTT SUMD, JETI UDI, and Spektrum satellite receivers are all supported. ALL types of servos are supported, so ALL receivers will work with ALL servos. You don't need special and expensive servos!

Single or dual receivers can be used with all supported systems!

X10+ Specifications:

Input type: serial data stream
Channel outputs: 10 (or 11 with auxiliary port)
Operating voltage: 1.8v - 16v
Servo bus current: >80A
Recognized protocols: Xtreme (fast), Xtreme (slow), JR DMSS X-Bus (Mode A & Mode B), Futaba SBUS/SBUS2, Graupner HoTT SUMD, JETI UDI, Spektrum satellite
Size: 1.4" x 1.4" x .450"
Servo plug spacing: .113"
Weight: .256oz (7.30g)
Accessories included: two mounting spacers
Recommeneded accessories: XPS Serial Link, UltraTwist cables, EC3 harness pair

Click here for accessories.

Click here to see the X10+ manual.

List Price: $44.95
Price: $29.95

RFU diversity receiver
1 of 2

Details 

XtremeLink® RFU Diversity Receiver

Compatible with all XtremeLink® and Graupner iFS systems.


The RFU is a highly sensitive receiver with diversity antennas, offering the absolute best range of our entire product line. This device interfaces directly into our X10+ Channel Expander. It can also output many other protocols, such as Spektrum satellite and Futaba S.BUS, and even a composite PPM data stream.

RFU Specifications:

Output type: serial data stream
Operating voltage: 1.8v - 10v
Output protocols: Xtreme (fast), Xtreme (slow) Futaba SBUS, Spektrum satellite (lowres/hires), PPM (positive/negative)
Antenna lead length: 6.5" (165mm) Size: 1.13" x 1.04" x .36" (28.8mm x 26.4mm x 9.1mm)
Weight: .3oz (8.49g)
Accessories included: velcro for mounting
Recommeneded accessories: X10+ Channel Expander, UltraTwist cables

Click here for wiring options.

List Price: $59.95
Price: $39.95

TattleTale

Details 

The ultimate tool for checking your power system!


The TattleTale is a tiny and lightweight device that plugs into a empty receiver channel (or through a Y-cable). This device measures the input voltage and displays the lowest voltage threshold that was captured after being powered on. With a programmable acquisition time of 1ms to 100ms, even the shortest voltage sags can be detected!

The TattleTale also monitors your servo signal and immediately reports any "glitch" in the servo output by flashing the multi-colored LED. PPM glitches, failsafes, and even reboots can now be reported!

As a special bonus, the TattleTale can also be a programmable timer, flashing the LED bright white after time has expired. This is great for night flyers!

People have been flying for decades with inadequate power. With the development of 2.4GHz radio systems, power requirements are now being enforced. Don't be caught with a power system that is marginal and risk your aircraft, car, or boat!

Features:

Voltage detection range from 2.1v to 16v
Voltage acquistion every 1ms to 100ms
Receiver glitch/failsafe/reboot detection
Programmable flight timer
Small size: .5" x .75"
Light weight: 1.75g (.062 oz)
Lifetime warranty!

List Price: $34.95
Price: $19.95

8 Channel Rx replacement case

Details 

Have a broken or ugly 8 channel receiver in your collection? Time for a brand new case!

Replacment case comes with top and bottom halves, with 4 new screws.

List Price: $4.95
Price: $1.99

Speed controller programming card

Details 

Compatible with all "Programmable" type XPS (only) speed controllers. Offers easy in-field programming of various settings.

Comes with servo extension.

List Price: $19.95
Price: $4.95

10 Channel Rx replacement case

Details 

Have a broken or ugly 10 channel receiver in your collection? Time for a brand new case!

Replacment case comes with top and bottom halves, with 4 new screws.

List Price: $5.95
Price: $2.29

XtremeLink® Device Programmer

Details 

This device and software allows you to wirelessly change the settings of XtremeLink® receivers and transmitter module! It also allows you to update the firmware of receivers and transmitter modules for those units that are in-field upgradable*.

Software is available for download from our website in the DOWNLOADS section.

Requires a USB type A to mini-b cable (commonly used with cell phones and digital cameras).

Applications for RxDiag, TxDiag, Device Programmer, and spectrum analyzer are currently available. Future applications such as support for flight simulators will be released in the future.

Detailed information can be found on our XDP support page. Click Here

* Only in-field upgradable units can have their firmware updated with this device. All units not capable of in-field updates can not be made to allow in-field updates. In these cases, new hardware is required.

List Price: $49.95
Price: $39.95

XtremeLink® Telemetry Station

Details 

This PC based hardware device and software allows you to wirelessly obtain telemetry data from any XPS receiver and transmitter in real time. The data can also be recorded and played back for later viewing. Information available: receiver battery voltage, transmitter battery voltage, signal strength, frame rate, number of channels in use, servo positions, brown out conditions, and information from any sensor connected (sensors sold separately).

This unit also performs all of the same functions as the Xtreme Device Programmer (XDP).

NOTE: v3.0 of later of the XtremeLink® firmware (both transmitter module and receivers) is required in order to use this product. This upgrade requires the return of your existing hardware to accomplish this. It is not possible to for a user upgrade any existing pre-v3.0 units in-field due to a necessary RF firmware change. Details on how to return your system(s) will be included when you receive this product.

Requires a USB type A to mini-b cable (commonly used with cell phones and digital cameras).

Detailed information can be found on our Telemetry Station support page. Click Here

List Price: $149.00
Price: $59.00

Red LED for X24

Details 

Red LED for use with the X24.

Clear LED lights up red when powered by 3.3v (or less). Plugs directly into the X24 to provide visual notification of the BEC system.
Comes with LED mounting bezel.

Color: Red
Size: T1-3/4 (5mm)
Cable length: 24"
Wire: 28awg

List Price: $4.99
Price: $2.49

2.4GHz Antenna

Details 

Replacement 2.1dBi antenna for use with XtremeLink transmitter modules. Get a spare and keep it in your flight box in case your buddy forgets their antenna!
List Price: $8.95
Price: $4.95

Blue LED for X24

Details 

Blue LED for use with the X24.

Clear LED lights up blue when powered by 3.3v (or less). Plugs directly into the X24 to provide visual notification of the BEC system.
Comes with LED mounting bezel.

Color: Blue
Size: T1-3/4 (5mm)
Cable length: 24"
Wire: 28awg

List Price: $4.99
Price: $2.49

Green LED for X24

Details 

Green LED for use with the X24.

Clear LED lights up green when powered by 3.3v (or less). Plugs directly into the X24 to provide visual notification of the BEC system.
Comes with LED mounting bezel.

Color: Green
Size: T1-3/4 (5mm)
Cable length: 24"
Wire: 28awg

List Price: $4.99
Price: $2.49

White LED for X24

Details 

White LED for use with the X24.

Clear LED lights up white when powered by 3.3v (or less). Plugs directly into the X24 to provide visual notification of the BEC system.
Comes with LED mounting bezel.

Color: White
Size: T1-3/4 (5mm)
Cable length: 24"
Wire: 28awg

List Price: $4.99
Price: $2.49

Amber LED for X24

Details 

Amber LED for use with the X24.

Clear LED lights up amber when powered by 3.3v (or less). Plugs directly into the X24 to provide visual notification of the BEC system.
Comes with LED mounting bezel.

Color: Amber
Size: T1-3/4 (5mm)
Cable length: 24"
Wire: 28awg

List Price: $4.99
Price: $2.49

External pin & flag switch for X24

Details 

Heavy duty pin & flag switch for use with the X24.

Plugs directly into the X24 to provide power off/on capabilities.

This unit has a green LED built internally that could be used for the X24's status LED with some extra wiring.

Comes with mounting plate and screws.

Color: Black
Hole Diameter: .695" (17.65mm)
Faceplate Diameter: .950" (24.15mm)
Cable length: 11" (280mm)
Wire: 28awg

List Price: $18.95
Price: $9.95

External slide switch for X24

Details 

Slide switch for use with the X24.

Plugs directly into the X24 to provide power off/on capabilities usign a small, lower current switch.

Comes with mounting plate and screws.

Color: Black
Size: .965" x .435" (24.5mm x 11.05mm) Cable length: 24"
Wire: 28awg

List Price: $8.99
Price: $3.49

« Previous | 1 | 2 | »

Untitled Document
Untitled Document
Copyright © 2006-16
Xtreme Power Systems
Legal Information
home | products | search | checkout | contact