X24 Integrated Flight Control System (Deluxe Edition w/current sensing)

Compatible with XtremeLink®, Futaba SBUS/SBUS2, Spektrum satellite, JR DMSS X-Bus (Mode A & Mode B), Graupner HoTT SUMD, JETI UDI, and Multiplex SLRx receivers!

Click picture for more details!

The X24 is the big brother to our popular X10+ Chanel Expander. This device is an integrated flight control system and performs the functions of a power expander, channel expander, voltage monitor, and failsafe system for different types of receivers that output a serial data stream. So, XPS Nano, Nano II, & RFU, Futaba SBUS/SBUS2, Spektrum satellite, JR DMSS X-Bus (Mode A & Mode B), Graupner HoTT SUMD, JETI UDI, and Multiplex SLRx receivers are all supported! ALL types of servos are supported! You don't need special and expensive servos!

Up to four receivers can be used with all supported systems!

X24 Specifications:

Input type: four inputs using a serial data stream
Channel outputs: 24
Operating voltage: 2.1v - 16v
Servo bus current: Dual 100A inputs
Recognized protocols: Xtreme, Futaba SBUS/SBUS2, Spektrum satellite, JR DMSS X-Bus (Mode A & Mode B),Graupner HoTT SUMD, JETI UDI, and Multiplex SLRx
Size: 3.6" x 3.8" x .650"
Weight: 3.85oz (109.25g) w/dual sets of 16awg power wires
Recommeneded accessories: XPS Serial Link, UltraTwist cables, LEDs, pin & flag switch

Click here for accessories.

Click here to see the X24 manual.

Note: these units are made to order! Select your wiring option below.

Special introductory offer! Get the X24 (Deluxe Edition) for $50 off for a limited time!

X24 Integrated Flight Control System (Standard Edition without current sensing)

Compatible with XtremeLink®, Futaba SBUS/SBUS2, Spektrum satellite, JR DMSS X-Bus (Mode A & Mode B), Graupner HoTT SUMD, JETI UDI, and Multiplex SLRx receivers!

Click picture for more details!

The X24 is the big brother to our popular X10+ Chanel Expander. This device is an integrated flight control system and performs the functions of a power expander, channel expander, voltage monitor, and failsafe system for different types of receivers that output a serial data stream. So, XPS Nano, Nano II, & RFU, Futaba SBUS/SBUS2, Spektrum satellite, JR DMSS X-Bus (Mode A & Mode B), Graupner HoTT SUMD, JETI UDI, and Multiplex SLRx receivers are all supported! ALL types of servos are supported! You don't need special and expensive servos!

Up to four receivers can be used with all supported systems!

X24 Specifications:

Input type: four inputs using a serial data stream
Channel outputs: 24
Operating voltage: 2.1v - 16v
Servo bus current: Dual 100A inputs
Recognized protocols: Xtreme, Futaba SBUS/SBUS2, Spektrum satellite, JR DMSS X-Bus (Mode A & Mode B),Graupner HoTT SUMD, JETI UDI, and Multiplex SLRx
Size: 3.6" x 3.8" x .650"
Weight: 3.85oz (109.25g) w/dual sets of 16awg power wires
Recommeneded accessories: XPS Serial Link, UltraTwist cables, LEDs, pin & flag switch

Click here for options.

Click here to see the X24 manual.

Note: these units are made to order! Select your wiring option below.

XtremeLink® 2.4GHz 6 channel Nano III end pin receiver

The 4th generation of XtremeLink® 2.4GHz receivers is here!

This end pin receiver is ideal for use in small gliders and anything requiring a tiny and lightweight receiver! However, don't let the size of this receiver fool you - it's a full range receiver! In fact, it has better range than the original 8 and 10 channel receivers we offered.

Supports PWM, PPM, "Xtreme" and "mixed mode" outputs so you can use flight stablizers, helicopter gyro systems, etc. with a single servo wire connection! With an operational voltage of just 1.8 volts (and up to 16v), brown outs are never a concern!

Supports wireless programming through our XDP unit

Compatible with all XtremeLink® and iFS brand radio systems.

Specifications:

Size: 1.4" x .71" (36.1mm x 18.25mm)
Weight: .124oz (3.5g)
Voltage: 1.8v - 16v

XtremeLink® 2.4GHz 6 channel Nano III top pin receiver

The 4th generation of XtremeLink® 2.4GHz receivers is here!

This top pin receiver is ideal for use in small gliders and anything requiring a tiny and lightweight receiver! However, don't let the size of this receiver fool you - it's a full range receiver! In fact, it has better range than the original 8 and 10 channel receivers we offered.

Supports PWM, PPM, "Xtreme" and "mixed mode" outputs so you can use flight stabilizers, helicopter gyro systems, etc. with a single servo wire connection! With an operational voltage of just 1.8 volts (and up to 16v), brown outs are never a concern!

Supports wireless programming through our XDP unit

Compatible with all XtremeLink® and iFS brand radio systems.

Specifications:

Size: 1.05" x .71" (27.5mm x 18.25mm)
Weight: .11oz (3.1g)
Voltage: 1.8v - 16v

XtremeLink® 2.4GHz 6 channel Nano III pin-less receiver

The 4th generation of XtremeLink® 2.4GHz receivers is here!

This pin-less receiver is ideal for use in small indoor aircraft where the extra weight of servo pins might be a burden! This is the same receiver as our end pin and top pin versions, so don't let the size of this receiver fool you - it's a full range receiver!

Supports PWM, PPM, "Xtreme" and "mixed mode" outputs so you can use flight stabilizers, helicopter gyro systems, etc. with a single servo wire connection! With an operational voltage of just 1.8 volts (and up to 16v), brown outs are never a concern!

Supports wireless programming through our XDP unit

Compatible with all XtremeLink® and iFS brand radio systems.

Specifications:

Size: 1.05" x .71" (27.5mm x 18.25mm)
Weight: .039oz (1.1g)
Voltage: 1.8v - 16v

XtremeLink® X10+ Channel Expander V2

Compatible with XtremeLink®, JR DMSS X-Bus (Mode A & Mode B), Futaba SBUS/SBUS2, Graupner HoTT SUMD, JETI UDI, and Spektrum/compatible Satellite receivers!

Click picture for more details!

This is the second version of our original version! The X10+ Channel Expander is a small device that acts as a power expander, channel expander, voltage monitor, and failsafe system for different types of receivers that output a serial data stream. So, XPS Nano, Nano II, & RFU, JR DMSS X-Bus (Mode A & Mode B), Futaba SBUS/SBUS2, Graupner HoTT SUMD, JETI UDI, and Spektrum satellite receivers are all supported. ALL types of servos are supported, so ALL receivers will work with ALL servos. You don't need special and expensive servos!

Single or dual receivers can be used with all supported systems!

X10+ Specifications:

Input type: serial data stream
Channel outputs: 10 (or 11 with auxiliary port)
Operating voltage: 1.8v - 16v
Servo bus current: >80A
Recognized protocols: Xtreme (fast), Xtreme (slow), JR DMSS X-Bus (Mode A & Mode B), Futaba SBUS/SBUS2, Graupner HoTT SUMD, JETI UDI, Spektrum satellite
Size: 1.25" x 1.4" x .450"
Servo plug spacing: .113"
Weight (top pins): .248oz (7.04g)
Weight (end pins): .275oz (7.79g)
Accessories included: two mounting spacers
Recommended accessories: XPS Serial Link, UltraTwist cables, EC3 harness pair

Click here for accessories.

Click here to see the X10+ manual.