+- XPS Technical Support Forum (https://www.xtremepowersystems.net/forum)
+-- Forum: XPS Products (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=1)
+--- Forum: X10+ (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=3)
+---- Forum: Setup and usage (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=9)
+---- Thread: SBUS-2 and the X10+v2 (/showthread.php?tid=180)
SBUS-2 and the X10+v2 - flyingw - 12-09-2025
Jim,
I hope you and your family are well.
On the XPS website, the X10+v2 includes SBUS and SBUS2 as supported protocols. However, in the X10+v2 manual, SBUS-2 is not listed as an input protocol that can be selected.
If I connect a Futaba SBUS-2 receiver to an X10+v2, will it work like regular SBUS, only without the telemetry part?
Thanks,
Paul
RE: SBUS-2 and the X10+v2 - XPS - 12-10-2025
Yes! SBUS and SBUS-2 are identical in their protocol. SBUS-2 just adds the ability to output telemetry back which we do not use with the X10+.
RE: SBUS-2 and the X10+v2 - flyingw - 12-11-2025
Thanks Jim, that's good to know. Paul