XPS Technical Support Forum
Programing RFU - Printable Version

+- XPS Technical Support Forum (https://www.xtremepowersystems.net/forum)
+-- Forum: XPS Products (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=1)
+--- Forum: XtremeLink Radio System (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=2)
+---- Forum: Receivers (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=7)
+----- Forum: RFU (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=20)
+----- Thread: Programing RFU (/showthread.php?tid=44)



Programing RFU - bruff - 07-29-2021

Can I reverse servos and adjust throw on the RFU while in S Bus mode?
Thanks!
Bob


RE: Programing RFU - XPS - 07-29-2021

No, only the channel order can be changed with the RFU.