+- XPS Technical Support Forum (https://www.xtremepowersystems.net/forum)
+-- Forum: XPS Products (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=1)
+--- Forum: XtremeLink Radio System (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=2)
+---- Forum: Transmitter Modules (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=5)
+----- Forum: JR/Taranis/Horus (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=13)
+----- Thread: JR Module limitation (/showthread.php?tid=56)
JR Module limitation - adnapak - 03-09-2022
Trying to find a use for a good JR11xZero.
I need 10ch to an X10/16, but as I understand only 9ch can be output from the current JR module using PPM9.
10ch can be output using SPCM, but the according to the doco the module can not handle the modulation.
Was ever an upgrade done to enable this?
Also does the RFU accept SPCM?
Assumed that Nano's won't.
Rather think that this may be the end of the road for my JR Tx, but modules work well in Taranis/Radiomaster.
Seems like Tx modules might be a dying breed
Regards,
RE: JR Module limitation - XPS - 03-10-2022
None of our products support any of the PCM protocols, just XPS Xtreme, PPM (various types), XJT-D16, and Spektrum's JR11x protocol.
RE: JR Module limitation - adnapak - 03-11-2022
(03-10-2022, 03:53 PM)XPS Wrote: None of our products support any of the PCM protocols, just XPS Xtreme, PPM (various types), XJT-D16, and Spektrum's JR11x protocol.
Thank you, another good oldie for the bin.