XPS Technical Support Forum
Two different Nanos, same servo positions? - Printable Version

+- XPS Technical Support Forum (https://www.xtremepowersystems.net/forum)
+-- Forum: XPS Products (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=1)
+--- Forum: XtremeLink Radio System (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=2)
+---- Forum: Receivers (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=7)
+----- Forum: Nano (https://www.xtremepowersystems.net/forum/forumdisplay.php?fid=19)
+----- Thread: Two different Nanos, same servo positions? (/showthread.php?tid=72)



Two different Nanos, same servo positions? - flyingw - 03-20-2023

Hi,

I am setting up a new airplane and I will use a Nano receiver.  The one I want to use is currently in another plane.

In the meantime I plan to use a different Nano that I have in my spares to center the servos and set up the pushrods.

Will using two different Nano receivers make any difference in the servo output positions?

Thank you,

Paul


RE: Two different Nanos, same servo positions? - XPS - 03-20-2023

The servos positions are all the same with all of our receivers as that is just a clock (PWM) for the servo position.


RE: Two different Nanos, same servo positions? - flyingw - 03-21-2023

Ok, thanks, Paul