Change in binding behavior with Futaba 9C and Nano Rx

[flyingw]

Good point! I turned off the wifi nearby router in the room and repeated the tests. I performed a binding procedure with the suspect Tx module and it still took awhile several seconds to bind while I moved the transmitter in closer starting at about three feet - it binded when it came within a foot of the receiver. I repeated the test again with my other non-suspect Tx module and it binded to the same receiver almost immediately and from distances up to 12 feet away in the room. That's what I remember with typical binding - almost immediate and from distances of three feet or more.

The suspect Tx module takes several seconds to bind after releasing the transmitter module button, and only at close range (one foot or less), during which time the receiver LED blinks a few times before going solid and then off.