I tested the X10+V2 powerbox again with the Boxer tx and ER6 rx with the same settings as with the X16, D250-104dBm, telemetry ratio 1:32 in Wide mode. I guess I lost no frames, or only those 5-10 lost frames per minute so hope/believe I must be satisfied.
You can see in the video that the green LED lights up steadily and does not flicker which it did in previous test.
And the result was the same with X16.
You can see a video here at https://www.youtube.com/watch?v=y6ap6BDbldI
/Ville
You can see in the video that the green LED lights up steadily and does not flicker which it did in previous test.
And the result was the same with X16.
You can see a video here at https://www.youtube.com/watch?v=y6ap6BDbldI
/Ville