03-31-2025, 08:40 PM
The amount time before entering failsafe can be programmed. 2 seconds is the default. As soon as the signal is available failsafe is exited.
Again, failsafe set to HOLD will not change the servo positions while a failsafe is occurring. A failsafe set to USER DEFINED will hold the failsafe at whatever positions you have deliberately set them to. You should be setting the failsafes to some known position. We typically recommend slight up elevator, and either slight left or right rudder. Failsafe is not designed to save an aircraft - it is designed to give you predictable flight path where you can determine where a loss of radio control impact will occur so that people can be moved.
We are still selling products, and doing upgrades and repairs, so people are still using XPS radio systems.
Again, failsafe set to HOLD will not change the servo positions while a failsafe is occurring. A failsafe set to USER DEFINED will hold the failsafe at whatever positions you have deliberately set them to. You should be setting the failsafes to some known position. We typically recommend slight up elevator, and either slight left or right rudder. Failsafe is not designed to save an aircraft - it is designed to give you predictable flight path where you can determine where a loss of radio control impact will occur so that people can be moved.
We are still selling products, and doing upgrades and repairs, so people are still using XPS radio systems.