Question.
Looking at this thread in RCG, https://www.rcgroups.com/forums/showthre...-XG11MV-Tx
I saw this in post numbers 4 and 5
Post number 4 by Antic Bipe
Hi Jim, does the XPS JR 11X module support all 11 channels when using the DSM modulation? Your module will however require an external aerial if used in the XG11MV.
Post number 5 by you
Yes, it does support all 11 channels.
I am not sure if they use serial (115.2K baud) like some of the DSM modules require, or the manchester encoding that the JR11x uses.
So my question is could install your JR-11X internal module into the XPS-J1 case upgrade w/antenna connector and use that module in the XG11-MV to use it with a RFU or Nano when the XG11MV uses DSM mode?
thanks,
Bill
Looking at this thread in RCG, https://www.rcgroups.com/forums/showthre...-XG11MV-Tx
I saw this in post numbers 4 and 5
Post number 4 by Antic Bipe
Hi Jim, does the XPS JR 11X module support all 11 channels when using the DSM modulation? Your module will however require an external aerial if used in the XG11MV.
Post number 5 by you
Yes, it does support all 11 channels.
I am not sure if they use serial (115.2K baud) like some of the DSM modules require, or the manchester encoding that the JR11x uses.
So my question is could install your JR-11X internal module into the XPS-J1 case upgrade w/antenna connector and use that module in the XG11-MV to use it with a RFU or Nano when the XG11MV uses DSM mode?
thanks,
Bill