08-19-2021, 09:30 PM
ALL of the transmitters are different and they have different code on the board, depending on if there are IFS or IFS-T, and if they are MC-19, MC-22, or MC-24. We had different skews for every combination because nothing was cross-compatible.
We never provided "G1" boards like what you have installed in your transmitter, so we have no idea how that is suppose to work. We only made modules specifically for each version of the Graupner transmitter. The G1 modules were strictly for the Multiplex radios (Profi 4000 and EVO), although we do use that same module for our "Universal Module". We made modules specifically for the MC-19, MC-22, MC-24, MX-16, MX-22, and MX-24, and none of those were using our "G1" module.
So, again,we can't answer your question because we never provided the modules the way you are using them.
We never provided "G1" boards like what you have installed in your transmitter, so we have no idea how that is suppose to work. We only made modules specifically for each version of the Graupner transmitter. The G1 modules were strictly for the Multiplex radios (Profi 4000 and EVO), although we do use that same module for our "Universal Module". We made modules specifically for the MC-19, MC-22, MC-24, MX-16, MX-22, and MX-24, and none of those were using our "G1" module.
So, again,we can't answer your question because we never provided the modules the way you are using them.