X10 SBUS input gives steady flickering

I configured a DragonLink receiver to output SBUS and connected it to an X10.

The system connects, but the LED on the X10 flickers steadily at a fast rate, something 10 per second, maybe faster.

A servo connected to the X10 moves as expected on the correct channel, but it moves in a slightly "ratchety" fashion.

Any ideas?  I tried inverted SBUS on the X10 but it did not connect at all.



Messages In This Thread
X10 SBUS input gives steady flickering - by flyingw - 01-05-2022, 12:19 PM

Users browsing this thread: 1 Guest(s)