Dual 2.4/9mHz system
#1
Firstly, no problems with XPS 2.4 module with any Rx.
Or a well known European dedicated 2.4 brand flying concurrently.

Maybe we can get a view from your knowledge.

This is out of the ballpark, but some are having trouble with loss of signal to Rx on Tx16S internal configuration.
Total loss of control and spiral in from level flight. Failsafe set on one occasion only, so doesn't seem a factor.
Doubtful that the Tx is a problem, common to 3 different Tx's.
Just who is using our R/C bandwidth? Everything from toys to licensed UAV. 
Increasing 2.4 activity in a rural zone, farming, water control, etc, etc.

Possible causes, band width, batteries.

1. Batteries are a well known make, A123 type with internal charge control, not dual, load test OK after crash.
2. Many flights successful prior to crashes.
3. Postulated that 2.4 is becoming overused, and users are running out of band wriggle room. 

So, do you have any views on producing dual band 2.4/9 mHz or just 9 mHz to improve the odds.
Or is this dual band idea just a blind alley, down which we don't need to go?

Regards,
Reply


Messages In This Thread
Dual 2.4/9mHz system - by adnapak - 06-06-2022, 09:57 PM
RE: Dual 2.4/9mHz system - by XPS - 06-09-2022, 01:20 PM
RE: Dual 2.4/9mHz system - by adnapak - 06-09-2022, 06:49 PM
RE: Dual 2.4/9mHz system - by XPS - 06-09-2022, 08:33 PM
RE: Dual 2.4/9mHz system - by adnapak - 06-10-2022, 05:11 PM



Users browsing this thread: 1 Guest(s)