Posts: 26
Threads: 7
Joined: Apr 2021
Jim,
Firstly have updated my system to Win11. Am a Ubuntu user, so maintain Win dual boot for XPS stuff.
So I wanted to check a few Nano's. Maybe my memory is bad, but has any thing changed? I can't get XDP to run as Owner.
The message "XDP/Telemetry station hardware not found" fronts up.
I re-installed XDP with the drivers. Seem to recall a similar problem from the past, but hey it was a long time ago.
Will you enlighten me
Posts: 211
Threads: 18
Joined: Jun 2018
We can run Windows 98 through Windows 11, but you need the proper drivers. You can get the driver installer from the manufacturer of the chip we used in that product:
https://ftdichip.com/drivers/d2xx-drivers/
Click the first link under D2XX DRIVERS.
Posts: 26
Threads: 7
Joined: Apr 2021
(06-06-2024, 05:35 AM)XPS Wrote: We can run Windows 98 through Windows 11, but you need the proper drivers. You can get the driver installer from the manufacturer of the chip we used in that product:
https://ftdichip.com/drivers/d2xx-drivers/
Click the first link under D2XX DRIVERS.
Thanks, installed new drivers, traced the problem to the UBS cable, guess it was getting a bit long in the tooth.
Posts: 211
Threads: 18
Joined: Jun 2018
Ha! Yeah, they don't make cables like they use to!
Posts: 30
Threads: 2
Joined: Mar 2025
(06-06-2024, 05:35 AM)XPS Wrote: We can run Windows 98 through Windows 11, but you need the proper drivers. You can get the driver installer from the manufacturer of the chip we used in that product:
https://ftdichip.com/drivers/d2xx-drivers/
Click the first link under D2XX DRIVERS.
i got it to work with this driver - at least it says something like XDP hard not found - which is true i cannot find my XDP device - anyone knows where to buy a new or used one?
thanks
erhard
Posts: 211
Threads: 18
Joined: Jun 2018
This went out of production about 8 years ago.