06-08-2021, 06:22 PM
(06-08-2021, 06:34 AM)XPS Wrote:(06-07-2021, 08:07 PM)A.Delaney Wrote: What if the situation is a rudder setup with two servos in the tail. One servo is on the opposite side of the fuse. One servo pushes while the other one pulls. Would the slave be reversed?
Only if the servo pulses are moving the opposite direction. So, if one servo has a PWM range that moves clockwise from 900us to 2200uis and the other moves counter-clockwise with the same 900us to 2200us range.
Okay thanks. It’s easy to get focused on direction and forget about PWM range. I never even looked at PWM range until I purchased an X24. It’s pretty cool knowing exactly where the servo position is.