Possible incompatibility with the older 8-Channel XPS receiver and OpenTx and XJT-D16
#2
This could be an issue with the frame rate being too fast for the older receivers.  Keep in mind that you can NOT change the number of channels or frame rate in the transmitter *after* a bind has occurred or you will experience the exact same thing with any of our receivers.  The frame rate and number of channels is stored in the receiver itself, and that information is used.  If that changes, the hopping sequence will go in and out of phase, resulting in lost packets.
Reply


Messages In This Thread
RE: Possible incompatibility with the older 8-Channel XPS receiver and OpenTx and XJT-D16 - by XPS - 04-11-2021, 08:22 PM



Users browsing this thread: 1 Guest(s)