Settings for Taranis X9D

[Falco]

Yes, you can use 22.5ms in PPM mode.  You can also use the XJT-D16 if you have our module that supports it.  That would give you up to 16 channels available.

I'm using the JR module with a RM Tx16s.  In PPM mode with 22.5ms and 300us, I can set the radio to about 11-12 channels.  After that the servo movement gets choppy.  Increasing the ms to over thirty will smooth the movement out.  I purchased my module this year.  I tried the XJT protocol but was unable to get a bind.  What is the procedure to use this protocol?