06-09-2022, 01:24 PM
This is to be expected! You NEED to increase the frame rate any time you add channels. The formula for doing this is:
Number of channels x 2.2ms + 4.7ms.
So, for 12 channels you MUST have the frame rate no less than 12x2.2+4.7 = 31.1ms. If you don't, you can lose part of your data and the controls will definitely become jittery as channels can cross into each other.
You can see that for 8 channels, 8*2.2+4.7 = 22.3ms, and that is what JR and other systems used since PPM was created for 8 channel radios.
Number of channels x 2.2ms + 4.7ms.
So, for 12 channels you MUST have the frame rate no less than 12x2.2+4.7 = 31.1ms. If you don't, you can lose part of your data and the controls will definitely become jittery as channels can cross into each other.
You can see that for 8 channels, 8*2.2+4.7 = 22.3ms, and that is what JR and other systems used since PPM was created for 8 channel radios.