X10+

[thebluemax]

You can do that but we recommend powering the RFU using only one of the X10+ boards - so in your Y-cable, pull the power wire from one of that plugs going into either X10+.

Thanks for getting back to me.  I must be doing something wrong as I have no power to the second X10 after cutting the power (middle red) lead on the Y harness to the second X10 board.  Nothing was done to the male to male wires.

RFU has 3 wires on it.  The one X10 with the battery connected to it has 3 wires on it and the other X10 has 2 wires on it (just brown and orange) as with the middle red is cut on the Y harness.    

thanks for your time and support