12-20-2021, 12:39 PM
(12-20-2021, 05:37 AM)flyingw Wrote: Ok, so if a transmitter is sending a serial PPM stream to its XPS Tx module, and the receiver gets the new stick positions every 22.5ms, then the servo gets the new positions every 22.5ms.
Yes, that is correct.
(12-20-2021, 05:37 AM)flyingw Wrote: When a transmitter uses XJT-D16 to communicate with its XPS Tx module, and the receiver gets the new stick positions every 18ms, then the servo gets the new positions every 18ms if it can take it (presumably it gets worked a little harder in the process).
Yes, that is correct.
ALL of our receivers output the channels at virtually the same time (within 32us of each other), so the servos are not updated sequentially (like PPM) or in groups (like what other companies do). Because of this, our products can have a frame rate as low as 3ms.