JR module with RadioMaster Tx16s & EdgeTx 2.7
I'm using the JR module with the RadioMaster Tx16s running EdgeTx 2.7.  Twice during the binding procedure the radio went into "emergency mode".  After successfully binding a Nano to the module I cycled the power on the module, not by cycling the power on the radio but by selecting the "off" option then the "XJT" protocol for the external module.  This will cycle the power on the module but twice, out of about a dozen bindings has put the radio in emergency mode.  Normal operation is returned by cycling the power of the radio.  Not sure if this is a problem or not.
Sounds like a problem with your transmitter as this has never been reported before!

Users browsing this thread: 1 Guest(s)