09-10-2022, 06:11 AM
New Information
While testing on the bench I noticed uncharacteristic flickering on the X10 LED. I took it outside to get away from my home wifi router and the flickering persisted. Then I performed a range test with the transmitter button pressed for low power mode. I could get no more than 30 feet before failsafe kicked in.
I usually got about 125 feet doing the same test, so something is wrong with either the RFU or the X10. I'll check the programming again, but was curious if you do repairs if I send in the RFU and X10?
Thanks,
Paul
While testing on the bench I noticed uncharacteristic flickering on the X10 LED. I took it outside to get away from my home wifi router and the flickering persisted. Then I performed a range test with the transmitter button pressed for low power mode. I could get no more than 30 feet before failsafe kicked in.
I usually got about 125 feet doing the same test, so something is wrong with either the RFU or the X10. I'll check the programming again, but was curious if you do repairs if I send in the RFU and X10?
Thanks,
Paul