10-03-2022, 10:32 AM
Jim, having problems binding a nano to the FRSKY - I have set it to XJT-D16, 18ms - when I follow procedure, the Tx module with show steady orange and the Nano stays rapid flashing red. I do not understand what I can be doing wrong:
Power on Nano, add binding plug, solid red, remove binding plug, rapid red flash
Power on the Tx holding the prog button in - when power is fully on, release the prog - LED goes solid orange
Do I need to change a setting on either the Nano or the Tx?
Power on Nano, add binding plug, solid red, remove binding plug, rapid red flash
Power on the Tx holding the prog button in - when power is fully on, release the prog - LED goes solid orange
Do I need to change a setting on either the Nano or the Tx?