Red LED for use with the X24.

Clear LED lights up red when powered by 3.3v (or less). Plugs directly into the X24 to provide visual notification of the BEC system.
Comes with LED mounting bezel.

Color: Red
Size: T1-3/4 (5mm)
Cable length: 24"
Wire: 28awg

Blue LED for use with the X24.

Clear LED lights up blue when powered by 3.3v (or less). Plugs directly into the X24 to provide visual notification of the BEC system.
Comes with LED mounting bezel.

Color: Blue
Size: T1-3/4 (5mm)
Cable length: 24"
Wire: 28awg

Green LED for use with the X24.

Clear LED lights up green when powered by 3.3v (or less). Plugs directly into the X24 to provide visual notification of the BEC system.
Comes with LED mounting bezel.

Color: Green
Size: T1-3/4 (5mm)
Cable length: 24"
Wire: 28awg

White LED for use with the X24.

Clear LED lights up white when powered by 3.3v (or less). Plugs directly into the X24 to provide visual notification of the BEC system.
Comes with LED mounting bezel.

Color: White
Size: T1-3/4 (5mm)
Cable length: 24"
Wire: 28awg

Amber LED for use with the X24.

Clear LED lights up amber when powered by 3.3v (or less). Plugs directly into the X24 to provide visual notification of the BEC system.
Comes with LED mounting bezel.

Color: Amber
Size: T1-3/4 (5mm)
Cable length: 24"
Wire: 28awg

Slide switch for use with the X24.

Plugs directly into the X24 to provide power off/on capabilities usign a small, lower current switch.

Comes with mounting plate and screws.

Color: Black
Size: .965" x .435" (24.5mm x 11.05mm) Cable length: 24"
Wire: 28awg

Ultra-Twist� cable with JR female connector on each end.

Offering the absolute best EMI/RFI noise rejection and incredible flexibility, these cables are the #1 choice for applications needing female to female connections - such the XPS-10 expander, multi-rotor control boards, flybarless systems, S.Bus interfaces, and telemetry systems.

Unlike traditional twisted cables, the Ultra-Twist� cables have an extremely tight twist which makes them easy to route, even through tight turns.

Length: 12"
Wire: 26awg, ultra-twist

Ultra-Twist� cable with JR female connector on each end.

Offering the absolute best EMI/RFI noise rejection and incredible flexibility, these cables are the #1 choice for applications needing female to female connections - such the XPS-10 expander, multi-rotor control boards, flybarless systems, S.Bus interfaces, and telemetry systems.

Unlike traditional twisted cables, the Ultra-Twist� cables have an extremely tight twist which makes them easy to route, even through tight turns.

Length: 25"
Wire: 26awg, ultra-twist

Ultra-Twist� cable with JR female connector on each end.

Offering the absolute best EMI/RFI noise rejection and incredible flexibility, these cables are the #1 choice for applications needing female to female connections - such the XPS-10 expander, multi-rotor control boards, flybarless systems, S.Bus interfaces, and telemetry systems.

Unlike traditional twisted cables, the Ultra-Twist� cables have an extremely tight twist which makes them easy to route, even through tight turns.

Length: 37"
Wire: 26awg, ultra-twist

Ultra-Twist� cable with JR female connector on one end and JST PH connector on the other end.

Offering the absolute best EMI/RFI noise rejection and incredible flexibility, these cables are the #1 choice for applications interfacing into Spektrum� products. Connects a Spektrum� or compatible satellite receiver directly to a standard servo port. Designed for use the XPS-10 expander and multi-rotor control boards. Note: no voltage regulation is done using this cable.

Unlike traditional twisted cables, the Ultra-Twist� cables have an extremely tight twist which makes them easy to route, even through tight turns.

Length: 12"
Wire: 28awg, ultra-twist

Ultra-Twist� cable with JR female connector on one end and JST PH connector on the other end.

Offering the absolute best EMI/RFI noise rejection and incredible flexibility, these cables are the #1 choice for applications interfacing into Spektrum� products. Connects a Spektrum� or compatible satellite receiver directly to a standard servo port. Designed for use the XPS-10 expander and multi-rotor control boards. Note: no voltage regulation is done using this cable.

Unlike traditional twisted cables, the Ultra-Twist� cables have an extremely tight twist which makes them easy to route, even through tight turns.

Length: 25"
Wire: 28awg, ultra-twist

Ultra-Twist� cable with JR female connector on one end and JST PH connector on the other end.

Offering the absolute best EMI/RFI noise rejection and incredible flexibility, these cables are the #1 choice for applications interfacing into Spektrum� products. Connects a Spektrum� or compatible satellite receiver directly to a standard servo port. Designed for use the XPS-10 expander and multi-rotor control boards. Note: no voltage regulation is done using this cable.

Unlike traditional twisted cables, the Ultra-Twist� cables have an extremely tight twist which makes them easy to route, even through tight turns.

Length: 37"
Wire: 28awg, ultra-twist

Ultra-Twist™ cable with JST PH connectors at each end.

Offering the absolute best EMI/RFI noise rejection and incredible flexibility, these cables are the #1 choice for applications interfacing into Spektrum™ products. Connects a Spektrum™ or compatible satellite receiver directly to the X24 or Spektrum™ main receiver. Note: no voltage regulation is done using this cable.

Unlike traditional twisted cables, the Ultra-Twist™ cables have an extremely tight twist which makes them easy to route, even through tight turns.

Length: 12"
Wire: 28awg, ultra-twist

Ultra-Twist� cable with JST PH connectors at each end.

Offering the absolute best EMI/RFI noise rejection and incredible flexibility, these cables are the #1 choice for applications interfacing into Spektrum� products. Connects a Spektrum� or compatible satellite receiver directly to the X24 or Spektrum� main receiver. Note: no voltage regulation is done using this cable.

Unlike traditional twisted cables, the Ultra-Twist� cables have an extremely tight twist which makes them easy to route, even through tight turns.

Length: 25"
Wire: 28awg, ultra-twist

NEW STYLE - NOW COMES AS A COMPLETE CABLE!

This device and software allows you to change the settings of X10+ Channel Expander and future products from XPS.

Requires a USB type A to mini-b cable (commonly used with cell phones and digital cameras), and JR female to female cable, both not supplied.

Works only with the 'XDP.exe' program in the XDP softrware package.

Detailed information and installation software can be found on our XDP support page. Click Here