XPS module in EVO

[erhard52]

this is my trouble.
per XPS manual it says the transmitter module should turn green after successful binding, which it does in my case BUT when after binding i power off and on the system for regular use the transmitter module LED flickers fast in green. i do not find any info in the manual and AI in its infinite wisdom says it is in range test mode

i do not know if that should again be solid green so why the flicker?

[XPS]

That is correct. That means the transmitter is in a hopping mode. Every single on/off is a different frequency being used. V3.x modules offered frequency hopping. So you have a v3.x module and are in one of the frequency hopping modes. This is perfectly normal... and the antenna is left ON during a range test.