09-06-2025, 07:32 AM
You gave me an idea, I was leaving the pin in the socket when powering off. I thought that was the procedure.
If I pull the pin after it powers off, the Green Status goes OFF. To power on again I plug the pin in and after it powers on, I pull the pin and everything is up and running.
I think it is right.
I thought the pin stayed IN until the next flight.
Seems to act like a PUSH Button.
If I pull the pin after it powers off, the Green Status goes OFF. To power on again I plug the pin in and after it powers on, I pull the pin and everything is up and running.
I think it is right.
I thought the pin stayed IN until the next flight.
Seems to act like a PUSH Button.